Open Access
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
Article Number 01003
Number of page(s) 5
Section Materials & Pathologies
Published online 28 April 2014
  1. J. Davidovits, “Soft Mineralogy and Geopolymers,” in Proceedings of the Geopoolymer 88 International Conference, France, 1988.
  2. J. Davidovits, “Geopolymers Inorganic polymerie new materials,” Journal of Thamal Analysis, vol. 37, pp. 1633–1656, 1991. [CrossRef]
  3. N. A. Lloyd and B. V. Rangan, “Geopolymer Concrete with Fly Ash,” presented at the Second International Conference on Sustainable Construction Materials and Technologies, Italy, 2010.
  4. I. Diaz-Loya, et al., “Mechanical Properties of Fly-Ash-Based Geopolymer Concrete”, ACI Materials Journal, vol. 108, pp. 300–308, 2011.
  5. A. Fernandez-Jimenez and A. Palomo, “Alkaline Activation of Fly Ashes. Manufacture of Concrete Not Containing Portland Cement,” presented at the International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, 2004.
  6. T. J. Gourley and G. B. Johnson, “Development in Geopolymer Precast Concrete,” in International Workshop on Geopolymers and Geoplymer Concrete, Perth, Australia, 2005.
  7. W. D. A. Rickard, et al., “Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications,” Materials Science and Engineering A, vol. 528, pp. 3390–3397, 2011. [CrossRef]
  8. I. Diaz-Loya, et al., “Factors Affecting the Suitability of Fly Ash as Source Material for Geopolymers,” Fuel, vol. 89, pp. 992–996, 2010. [CrossRef]
  9. A. Neville, Properties of Concrete, 4th ed.: Longman Group Limited, 1995.
  10. U. Schneider, “Concrete at high temperatures—a general review,” Fire Safely Journal, vol. 13, pp. 55–68, 1988. [CrossRef]
  11. M. Guerrieri, et al., “Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures,” Materials and Structures, vol. 43, pp. 765–773, 2010. [CrossRef]
  12. A. Elimbi, et al., “Effects of calcination temperature of kaolinite clays on the properties of geopolymer cements,” Construction and Building Materials, vol. 25, pp. 2805–2812, 2011. [CrossRef]
  13. J. v. Jaarsveld, et al., “The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers,” Chemical Engineering Journal, vol. 89, pp. 63–73, 2002. [CrossRef]
  14. D. Kong and J. G. Sanjayan, “Damage behavior of geopolymer composites exposed to elevated temperatures,” Cement & Concrete Composites, vol. 30, pp. 986–991, 2008. [CrossRef]
  15. D. Kong and J. G. Sanjayan, “Effect of elevated temperatures on geopolymer paste, mortar and concrete,” Cement and Concrete Research, vol. 40, pp. 334–339, 2009. [CrossRef]
  16. D. Kong, et al., “Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures,” Cement and Concrete Research, vol. 37, pp. 1583–1589, 2007. [CrossRef]
  17. Z. Pan and J. G. Sanjayan, “Stress–strain behaviour and abrupt loss of stiffness of geopolymer at elevated temperatures,” Cement & Concrete Composites, vol. 32, pp. 657–664, 2010. [CrossRef]
  18. D. Hardjito and B. V. Rangan, “Development and Properties of Low-Calcium Fly Ash-Based Geopolymer Concrete,” Curtin University of Technology 2005.
  19. M. T. Junaid, et al., “Mix Design Procedure for Alkali Activated Fly Ash-based Geopolymer Concretes,” in International Conference on Engineering and Applied Science, Beijing, China, 2012, pp. 139–152.
  20. S. Australian, “AS 1010.9-1999: Determination of the Compressive Strength of Concrete Specimens,” in Methods of Testing Concrete, ed, 1999.
  21. RILEM, “Test methods for mechanical properties of concrete at high temperatures. Recommendations Part 6: Thermal Strains,” vol. 129-MHT, ed, 1997.