Behavior of CuPb12Sn6 Alloys subjected to Heat Treatments
1 Department Technologies and Equipments for Materials Processing, Gheorghe Asachi Technical University of Iasi, D Mangeron Street, no 41A, Iasi
2 Faculty of Engineering Technology, Universiti Malaysia Perlis, Kangar, Perlis, Malaysia
3 Center of Excellence Geopolymer & Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis, Kangar, Perlis, Malaysia
4 Czestochowa University of Technology, Institute of Materials Science and Engineering, 19 Armii Krajowej Av., Czestochowa, Poland
* Corresponding author: firstname.lastname@example.org
The paper present the structural modifications induced by 3 heat treatments: homogenization, recrystallization and quenching, respecting the specific parameters of copper based alloys. The obtained modifications by heat treatments were highlighted by micro-hardness measurements, with Vickers method, and by electronic structural microscopy, at various magnitudes.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.