Error Detection and Classification of Tangential Radial Single Machining of Non-Circular Gear
School of mechanical engineering, Donghua University, Shanghai 201620, People’s Republic of China.
The studies on non-circular gear cutting and using errors were generally based on theory of cylindrical gear errors, and the similarities and differences between cylindrical gear and non-circular gear were combined to study the change rule of non-circular gear contacting line and obtained corresponding conclusions. In this paper, from a different perspective, by starting from the non-circular gear engagement principle, on the basis of analyzing the concrete geometric error conditions, new type tooth profile algorithm routine is reasonably modified, and needed non-circular gear tooth profile error contrast figure is obtained. Furthermore, theoretical derivation is carried out by incorporating analytical method and contacting line incremental method, validity of computer simulation is verified, a reasonable classification method is proposed based on the characterization of the error characteristic code in the general case, Summed up the error genetic map which possess enormous significance to direct practice generation.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.