A FEM Modeling of the Concrete Pavement Made of the Recycling Material
1 Faculty of Technical Sciences. 21000 Trg Dositeja Obradovića 6, Novi Sad, Serbia
2 St. Petersburg State Polytechnical University, 195251 Politekhnicheskaya str. 29, Saint-Petersburg, Russia
* Corresponding author: firstname.lastname@example.org
Paper is a brief review of the research focused on formulation an numerical model for the concrete pavement which is made by the recycling material. For numerical modeling the finite element model (FEM) and the 3D finite element model were applied. The software EverFE 2.25, was used. The results of FEM analysis is in a chapter shape showing move value change, strees and deflections for all layers a construction road model. In the next phase of the research was provided by FEM software with appropriate general purpose non-linear models, which allows the analysis of the real behavior of solid pavement under load.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.