The Research of Tank Sides Geometrical Forms after their Long-Term Usage in the Oil Transportation System
1 Industrial University of Tyumen, 625001, Volodarskogo str., 38, Tyumen, Russia
2 Gubkin Russian State University of Oil and Gas, Leninsky prospekt 65, Moscow, Russia
3 JSC “Giprogazcentr”, st. Alexeevskaya 26, Nizhniy Novgorod, Tyumen, Russia
* Corresponding author: firstname.lastname@example.org
During the technical diagnosis of vertical steel tanks it is necessary to evaluate the influence of geometry imperfection on deflected mode and resource. One of the most significant characteristics of geometry, definable during the full-scale tank diagnosis, is deflections of tank generatrices from the vertical. In the report, the tank geometry research results are represented on the basis of measuring data of 98 oil transporting system tanks
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.