Conditions and Characteristics of Coal Water Slurry Containing Petrochemicals Ignition by Hot Particle
1 Institute of Strength Physics and Materials Science SB RAS, 634055 Tomsk, Russia
2 National Research Tomsk Polytechnic University, 634055 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
Characteristics of CWS containing petrochemicals ignition by single hot particle in disk shape established experimentally. The main components of fuel composition are coal 45 %, water 45 %, used engine oil 10 %. The main parameters of local heat sources are: material – steel, diameter 10–12 mm, high 4–8 mm. As a result of experimental study is established limit (minimum) conditions for ignition of CWS containing petrochemicals by hot particle and the impact of local heat source parameters on the main process characteristic – ignition delay time.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.