Workspace and Kinematics Analysis of Redundant Space Manipulator
School of Mechanical Engineering, Dalian University of Technology, 116024 Dalian, China
In order to meet the requirements of tasks in the complex space environment, we designed a kind of 7 degrees of freedom redundant space manipulator in this paper. Its 3D modelling is based on SolidWorks 2015. The joint coordinate system of redundant space manipulator is described with the Denavit-Hartenberg (D-H) method. And the kinematic model is established. The direct kinematic equations of redundant space manipulator are derived by the homogeneous coordinate transforming matrices. The workspace is simulated and analysed using the Monte Carlo method. The experimental results showed that the workspace of 7 degrees of freedom redundant space manipulator, which was designed in this paper, changed smoothly. What’s more, it had not the abrupt phenomenon, and the independent part is bigger. Thus it verifies the rationality of our designing about the redundant space manipulator. It provides a good reference for the path planning and obstacle avoidance planning.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.