Design on curves of wall-thickness for Blow Molding Machine based on HMI
School of Mechanical Engineering,Nantong University, NanTong, JiangSu, China
a Corresponding author: firstname.lastname@example.org
Properly control of blow molding machine’s wall-thickness relates to the quality of plastic products,design on curves is the key technology of blow molding machine’s wall-thickness control.Adopted cubic spline curve as a fitting prototype,used advanced HMI as a design platform,by cooperation with HMI configuration function and macro code,an interface of curves was designed,a good performance of human-computer interaction and core data’s transmission in the whole machine were realized.By using this method,the integration of the system was increased and costs was reduced dramatically.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.