Research on Design of Plate-type Electromagnetic Coupler in Underwater Inductive Power Transmission
Zhonghuan Information College Tianjin University of Technology
a Corresponding author: email@example.com.
Magnetic coupler has a good application in the field of underwater sensor. Magnetic coupler at work, interference by underwater complex situation, stability and efficiency of charging device of the gap is larger fluctuations. The traditional electromagnetic coupling is charging for the stability of the clearance to demand higher. Charging for underwater, as a result of the existence of ocean currents, electromagnetic coupling clearance may not remain very stable. When there is deviation gap, a larger electromagnetic coupling performance deviation. On this particular problem, it puts forward the design method of a new type of plate type electromagnetic coupling. First of all, the leakage inductance of the finite element method to calculate system and excitation inductance, establish electromagnetic coupler with compensation capacitor equivalent circuit, and the primary circuit and secondary circuit was designed. On the basis, the voltage gain and efficiency of the system are carrying on the theoretical derivation and calculation. The simulation experimental results show that the magnetic coupler has a stable voltage gain and charging efficiency, when the partial core within 10 mm, voltage gain remains steady at 5.8%, efficiency remain at around 90%.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.