Co-simulation of Six DOF Wire Driven Parallel Mechanism Based on ADAMS and Matlab
School of Mechanical and Precision Instrumental Engineering, Xi’an University of Technology, Xi’an 710048, P. R. China
a Corresponding author: email@example.com
The dynamic model of the 6 DOF Wire Driven Parallel Mechanism (WDPM) system is introduced. Based on MATLAB system, the simulation of the inverse dynamic model is achieved. According to the simulation result, the mechanical model for the WDPM system is reasonable. Using ADAMS system, the dynamic model of the virtual prototype is verified by the simulation analysis. The combined control model based on ADAMS/Simulink is derived. The WDPM control system is designed with MATLAB/Simulink. The torque control method is selected for the outer ring and the PD control method for the inner ring. Combined with the ADAMS control model and control law design, the interactive simulation analysis of the WDPM system is completed. According to the simulation results of the spatial circle tracking and line tracking at the end of the moving platform, the tracking error can be reduced by the designed control algorithm. The minimum tracking error is 0.2 mm to 0.3 mm. Therefore, the theoretical foundation for designing hardware systems of the WDPM control system is established.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.