Tribological impact of the finishing technology onto meso- and microforming processes
1 Professorship Micromanufacturing Technology, Technische Universität Chemnitz, 09107 Chemnitz, Germany
2 Fraunhofer Institute for Machine Tools and Forming Technology, Reichenhainer Str. 88, 09126 Chemnitz, Germany
a Corresponding author: e-mail: email@example.com
Tribological conditions between workpiece and tool have a major impact onto forming processes. Besides lubrication, temperature, and material, they are mainly influenced by the tool surface characteristics, especially by its topography, which is a result of finishing technology. Thereby formed lubricant pockets are of prime importance for the tribosystem due to its ability to separate the tribopartners by storing lubricant. The influence of four different tool finishing processes and their according surface topographies onto frictional behaviour have been investigated and quantified by the barrel compression test, in dry and lubricated tribosystems. The tool steel surfaces were stochastically microstructured by grinding and spark erosion as well as deterministic structured with micro calottes, applied by jet electrochemical machining and compared to a polished reference tool. The allocation of open and closed lubricant pockets over tool surfaces before and after the forming process was analysed by a self-made MATLAB tool.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.