Performance of different fire retardant products applied on Norway spruce tested in a Cone calorimeter
Department of Engineering Science, Timber Engineering Unit, University of Innsbruck, Innsbruck, Austria
On the European market there are several fire retardant products available, which reach class B in the European classification system. The producers promise their fire retardants are effective in reducing different reaction to fire parameters of wood such as the time to ignition, the mass loss rate, the heat release rate, the total heat release, the charring rate and the flame spread. This paper discusses the performance of fire retardant products as pressure impregnated wood, non-intumescence surface coatings and intumescence coatings on Norway spruce (Picea abies). The investigations are performed by using a cone calo- rimeter test according to ISO 5660. The thermal exposures of the investigations are 50 kW/m2 and the standard IS0 834 test curve. As result information about the heat release rate, the mass loss rate and the total heat release for duration of 900 seconds will be presented in this paper.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.